Skip to content
Freight shipping across the lower 48 Manufacturer warranty on every battery Free sizing help from our team

Free sizing tool

What Size Solar Battery Bank Do I Need?

The battery bank you need depends on the loads you want to cover, how long you want them to run, depth of discharge, and system voltage. Enter your appliances or daily kWh here to estimate rated kWh and amp hours. That figure is for planning and shopping, not a final design.

1. Your energy use

List your appliances, or enter daily kWh from your utility bill.

ApplianceWattsHours/dayQtyRemove

2. Your system

Grid connection
12 h
How long the batteries should carry your loads during an outage.
90%
LiFePO4 is commonly run at 80 to 90%.
System voltage
Your estimate
Daily use6.1 kWh
Usable energy3.4 kWh
Rated capacity3.8 kWh
Amp hours74 Ah

Estimate only. Results are a starting point, not a design. Confirm sizing, inverter compatibility and local code with our team or your installer before you buy.

Batteries that fit this estimate

Based on nominal capacity at your selected voltage. Prices are current list prices and can change.

    Ask us to check my sizing

    Key takeaways

    • The battery bank you need depends on the loads you want to cover, how long you want them to run, depth of discharge, and system voltage.
    • The calculator scales daily energy to your backup window, allows for 90% inverter efficiency, and divides by depth of discharge to give the rated kWh to shop for.
    • With the default appliance list and 12 hours of grid-tied backup on a 48V bank at 90% depth of discharge, it estimates about 3.8 kWh of rated capacity, or about 74 Ah.
    • Amp hours change with voltage even when kWh stays the same.
    • It does not size solar charging or inverter surge. For panel and array sizing, use the solar panel calculator at Solar Factory Outlet.

    How many kWh of battery do I need?

    The battery size you need is the energy your loads will use during the backup window, divided by inverter efficiency, then divided by your planned depth of discharge. In the calculator above, that produces a rated kWh to buy and an amp-hour figure at 12.8V, 25.6V, or 51.2V nominal, the LiFePO4 equivalents of 12V, 24V, and 48V. Enter your own loads or daily kWh and backup hours to get a planning estimate. It does not replace a load study or a check of your inverter’s battery voltage and surge ratings.

    How to use this battery size calculator

    1. Choose an appliance list or daily kWh. If you start from a utility bill, you can divide monthly kWh by 30 to get a daily figure.
    2. Choose grid-tied backup or off-grid. Set backup hours (or hours of autonomy), depth of discharge (LiFePO4 is commonly run at 80% to 90%), and system voltage.
    3. Read the estimated daily energy, usable kWh, rated kWh to buy, and amp hours, then review the matching batteries from the store.

    How the estimate works

    We add up the watts and hours of each appliance to find your daily energy use in kWh. That number is scaled to your backup time, divided by an assumed 90% inverter efficiency, and divided again by your depth of discharge to reach the rated battery capacity to buy. Amp hours are the rated kWh divided by the nominal voltage of a LiFePO4 bank: 12.8V, 25.6V or 51.2V.

    How do I size a solar battery bank?

    Start with the loads that must stay on, not every appliance in the house. Convert that list to daily kWh, then set how many hours you want those loads covered. The calculator will raise the number to cover inverter losses and the unused portion of the bank. For a longer walkthrough, see how to size a solar battery bank and what depth of discharge means.

    What size battery do I need for home backup?

    Example with the calculator’s default inputs: a refrigerator, ten LED lights, a Wi-Fi router and modem, a TV, and a well pump use about 6.1 kWh a day. For 12 hours of grid-tied backup at 90% depth of discharge on a 48V bank, the calculator estimates about 3.4 kWh usable and 3.8 kWh of rated capacity, or about 74 Ah at 51.2V nominal.

    Example calculator result
    ResultDefault example
    Daily use6.1 kWh
    Usable energy (12 h)3.4 kWh
    Rated capacity3.8 kWh
    Amp hours (48V)74 Ah

    The calculator uses these planning defaults. Change them in the tool to match your equipment.

    SettingPlanning default
    Inverter efficiency90% (fixed in this estimate)
    Depth of discharge90% default, adjustable from 50% to 100%. LiFePO4 is commonly run at 80 to 90%.
    Nominal voltage (LiFePO4)12V = 12.8V, 24V = 25.6V, 48V = 51.2V
    Backup hours12 hours default, adjustable from 1 to 72

    Source: the defaults built into this calculator. They are planning figures, not battery specifications. Check the datasheet for your battery and inverter.

    How long will a battery run my fridge?

    Use the daily kWh from your EnergyGuide label or a watt-hour meter, not a guess. If that figure is 1.2 kWh per day and you want 24 hours of coverage at 90% depth of discharge on a 48V bank, the calculator estimates about 1.5 kWh of rated capacity, or about 29 Ah at 51.2V nominal. If lights, a well pump, or a furnace fan run at the same time, runtime drops. You can also read how long a home battery lasts in a power outage.

    Worked example

    Suppose your critical loads use 10 kWh per day and you want 12 hours of backup on a 48V LiFePO4 bank at 90% depth of discharge. The loads draw 5.0 kWh in those 12 hours. At 90% inverter efficiency, the batteries must deliver about 5.6 kWh usable. At 90% depth of discharge, that is about 6.2 kWh of rated capacity, or about 121 Ah at 51.2V nominal. Change the daily kWh, hours, and voltage in the calculator to match your house.

    What the calculator does not cover

    • Surge power for motors, pumps and compressors. Check your inverter and battery discharge ratings.
    • Solar production and charging time. Off-grid systems also need enough panels and charging capacity.
    • Cold weather, battery aging and local electrical code.

    Battery calculator FAQ

    How do I size a solar battery bank for my house?

    Enter the loads you want to cover, or your daily kWh, then set backup hours, depth of discharge, and voltage. The calculator scales that daily energy to your backup window, accounts for inverter efficiency, and divides by depth of discharge to estimate the rated kWh to shop for.

    What size battery do I need for home backup?

    It depends on how much energy you want to use during the outage, not on a single standard size. Enter those loads or that daily kWh, and the hours you want covered, to get a rated kWh and amp-hour estimate. Rerun it if you add or drop loads.

    How many kWh of battery do I need?

    Start from the energy your covered loads use in the backup window, then increase the figure to allow for inverter losses and the depth of discharge you plan to use. The calculator returns a rated kWh, which is the size you shop for, and the equivalent amp hours at your voltage.

    Should I choose 12V, 24V, or 48V?

    Match the battery voltage to your inverter. Home systems usually use 48V. 12V and 24V are more common on smaller backup setups. Amp hours change with voltage even when kWh stays the same.

    Why is the kWh I should buy higher than the energy my loads use?

    Two cuts come out of the bank before it is considered usable in this estimate: inverter and wiring losses, and the depth of discharge you set. The rated kWh is what you shop for.

    Does this calculator include solar production or surge?

    No. It sizes storage from your loads and backup hours. It does not estimate solar charging time, and it does not size inverter surge for motors, pumps, or compressors. Check those ratings separately, especially on an off-grid system.

    Guides and batteries to read next

    These pages on this site go deeper after you have a size:

    These results are estimates. Use them as a starting point and let our team check your numbers before you buy. Send us your inverter model, your list of loads and your goals.

    Contact our team Shop batteries

    Embed this calculator

    Free to use on your site. The embed shows the tool only and links back here.